The fundamentals for safe working environments

Remmers floor coverings are solvent-free and physiologically safe after curing. The suitability as an application for seamless floors in the food industry and in car parks have been tested and confirmed by external institutes. The systems are distinguished thanks to their high mechanical and good chemical resistance.

Efficient systems can be created from a combination of special epoxy resin binding agents and fillers that are suitable for various application areas. Flexible and safe at the same time – Remmers Crete PU-concrete is the perfect combination of water based polyol emulsion and polyurethane binding agent made of polymer MDI. This makes the floor extremely resistant to thermal, chemical and mechanical loads.

But even where there are no high mechanical requirements, the Remmers product range with its unique sealants offers a variety of possibilities to meet the requirements of “decorative and slip-resistant” flooring.

Thanks to these and many other properties, these products and systems have proven themselves for decades as excellent flooring systems in the industry where anti-slip and ease of cleaning must go hand in hand.

Industrial floors – floors for various environments

Industrial floor systems can be found in all major sectors. That is why we, along with our experienced partners, have been providing support to a wide range of industrial sectors from automobile or mechanical engineering through to pharmaceutical and other industrial sectors where floors need to keep what they promise and meet certain criteria.

An important success factor is the durability of an industrial floor. The most common mechanical loads to which floors are exposed are: traffic, impact, abrasion or point loads. This is why floor systems need to be specifically selected and applied for the individual loads.

In addition, chemical resistance is becoming increasingly important loads with respect to the stricter ground and water pollution control regulations (WHG § 62/63). Numerous chemicals are used in industrial applications and these can impact heavily on the floor substrate. These include oils, greases, fuels and soluble salts through to various alkalis, very caustic acids and aggressive cleaning agents. The concentration of chemicals in combination with the temperature conditions create a base for selecting the optimum industrial floor.


FeRFA Types of synthetic resin flooring

Name Description Duty Thickness
1 Floor Seal Applied in two or more coats. Generally solvent or water borne. LD up to 150 μm
2 Floor Coating Applied in two or more coats. Generally solvent free. LD/MD 150 μm to 300 μm
3 High Build Floor Coating Applied in two or more coats. Generally solvent free. MD 300 μm to 1000 μm
4 Multi-layer Flooring Aggregate dressed systems based on multiple layers of floor coatings or flow-applied floorings, often described as ‘sandwich’ systems. MD/HD 2 mm
5 Flow Applied Flooring Often referred to as ‘self-smoothing’ or ‘self-levelling’ flooring and having a smooth surface. MD/HD 2 mm to 3 mm
6 Resin Screed Flooring Trowel-finished, heavily filled systems, generally incorporating a surface seal coat to minimize porosity. MD/HD > 4 mm
7 Heavy Duty Flowable Flooring Having a smooth surface. HD/VHD 4 mm to 6 mm
8 Heavy Duty Resin Flooring Trowel-finished, aggregate filled systems effectively impervious throughout their thickness. VHD > 6 mm

Sustainable car park solutions on all levels

Today’s car parks must be extremely durable and robust so that their use is guaranteed for many years. Due to the daily exposure, car park and parking deck surfaces are subject to heavy, thermal and chemical loads which wear out and eventually become damaged or destroyed over time. The loads are caused by, among other things, the penetration of water and, in winter, de-icing salts. In addition, the vehicles also increase the CO₂ concentration due to their exhaust gases. When concretes surfaces are driven over, vibrations are created leading to fine cracks. This allows pollutants to penetrate more easily and create faster damage to the reinforcement steel and concrete.

We supply tested and long-standing, proven surface protection systems for this extreme usage. Our systems are not just used in new construction buildings, but also for restoration and repair projects where they are often the most sustainable solution for protecting the concrete structure. That is why we not only offer our certified products, but we also support you with analysis and advice for your repair project so that the concept represents a sustainable solution on all levels.

National and international references verify the durability of the our car park surface protection systems.

Low-emission floor coatings for your requirements

A floor should not only be able to withstand rising damp or heavy loads, but also present no harm to the air quality in the room. The emission of volatile organic compounds (VOC) can contaminate the room air and be harmful to health. To eliminate this, we offer a complete VOC-tested product range that corresponds to the stringent criteria of the AgBB. The entire coating structure is assessed by the independent and accredited testing institutes in test chambers, and checked in annual random checks.

Our systems not only water based coatings, we also have a large range of polyurethane and epoxy-resin coatings which also have a general technical approval. This increases the flexibility even in the planning phase so that all requirements can be taken into account and the building owner receives the system best suited for their needs.

Sustainability – the simple maintenance, lower material consumption and durability contribute to the positive ecological footprint of an industrial floor. Thanks to these properties they have a much lower impact on the environment than many other covering types. Corresponding national and international declarations of conformity (e.g. DGNB / LEED certificates) give users and investors assurance with regard to sustainability.

Epoxy resin flooring: Food Industry and Industrial Kitchens

The food industry is characterised by the highest standards in terms of quality. Whether food production, large-scale industrial kitchens or canteens are concerned, temperate production with consistently high quality coupled with the highest requirements in terms of hygiene and cleanliness are essential.

Your requirements:

•    Materials used must not impair food stuffs
•    Easy to clean
•    Joint free
•    Slip proof
•    Minimal downtime for production

M.V. O’Halloran Ltd., have a decorative colour-quartz flooring system for you!

Contact us for further information on our decorative colour-quartz flooring systems or any of our other areas of expertise listed below.


  • Abrasion Resistant Structured Finishes
  • Crack Injection
  • Anti – Bacterial Coatings
  • Decorative / Commercial Finishes
  • Anti G / Carbonation Coatings
  • ESD Conductive Systems
  • Asbestos Encapsulation
  • High Chemical Resistant Systems
  • Roof Membrane Systems
  • Impact Resistant Flooring
  • Bund Lining Systems
  • Joint Sealants
  • Industrial Flooring
  • Hygienic Finishes
  • Anti Fatigue Surfaces
  • Logo & Safety Markings
  • Concrete Protection
  • Sound Absorption Resins
  • Concrete Repair
  • Multi Elastic Sports Flooring



Industrial Flooring Systems for the Food and Drinks Industry

Resin flooring provides a hard wearing, hygienic, seamless, and slip resistant floor finish which is easy to clean and maintain, all of which are key requirements for the food / beverage environment.

The floor of a food / beverage production facility is typically exposed to all sorts of  byproducts, including fats, hot oils, blood, sugars, and natural acids. Some of these substances can cause serious damage to concrete because of their corrosive nature.

M.V. O’Halloran can advise what will work for you in order to achieve a cost effective solution with the least disruption to your production, that will withstand traffic, machinery and equipment whilst complying with health and safety regulations.

Contact us for further information on our industrial flooring systems for the food and drink sector or any of our other areas of expertise listed here

Pharmaceutical Resin Flooring Systems Ireland

The right high-performance pharmaceutical flooring is essential for production, research and development laboratories and other facilities in maintaining their strict hygiene and safety protocols.

The pharmaceutical industry stands for specialisation, quality and innovation. In the pharmaceutical sector peoples’ health and well-being is at the heart of operations. The highly critical areas in this production chain will require a flooring system for maintaining a sterile, sanitary and safe environment.

The floor is the part of a building that is used the most. The demands on a floor are as varied as the industrial and commercial uses of a building. To ensure the lasting protection of  your pharmaceutical floor, the flooring system has to be matched to suit your particular requirements.

M.V. O’Halloran can assist you with those requirements which may include the following:

  • Guaranteeing a suitable clean-room atmosphere
  • Protecting the floor from aggressive chemicals
  • Prevention of electrostatic charging
  • Attractive design of laboratory areas and in front-of-house areas open to the public

Contact us for further information on our pharmaceutical flooring systems or any of our other areas of expertise listed here.




Industrial Flooring – Trowelled Resin Screeds

M.V.O’Halloran Ltd. provide resin flooring in Ireland to the pharmaceutical, industrial and manufacturing sectors.

Epoxy mortar screeds offer superior physical toughness with increased impact resistance for the toughest industrial environments. These screeds have excellent impact resistance and using a range of surface finishes can offer anti slip and chemical resistant properties.


Features Uses
Easy to clean Pharmaceutical production
Excellent chemical resistance Laboratories
Excellent abrasion resistance Food production
Excellent impact resistance Heavy engineering
UV resistant Warehousing
Fast track installation  – minimising downtime for a facility Showrooms


Contact us for further information on our resin screed systems or any of our other areas of expertise listed here.

Epoxy Resin Flooring & Industry


Chemicals and pharmaceutical industry resin flooring

Epoxy resin flooring systems with high technical and optical qualities for the protection of industrial floors: highly chemical-resistant, temperature-resistant, non-skid if required, conductive and decontaminable.



Food industry

Physiologically harmless coating systems with tested suitability for the food industry: temperature-resistant, impact-resistant, can be cleaned with superheated steam.



Electrical and electronic industry epoxy resin coatings

Conductive coating systems, if necessary in accordance with ESD-guidelines: Easy to clean and approved for use in cleanrooms.



Metal working, automobile and engineering industries

High-quality epoxy resin coating systems: mechanically resistant, conductive if required, chemically resistant, high optical qualities and easy to clean.



Press and Paper Industry

Technically and optically high standing flooring systems for the specific needs of these industries: Highly resistant to chemical and temperature born loads, anti-skid, conductive and easily decontaminable.



Sales and storage areas

Coating systems for surfaces with high mechanical loading: Suitable for transport vehicles, chemical-resistant, easy to clean, allows for individual design.



Floor spaces with special requirements

Coating systems with special requirements as to the impermeability of the drainage areas or flexibility and impact resistancy, and systems whose suitability has been proven in separate tests.



Trade, Banks and Insurance companies – Decorative resin floor finishes

Durable highly decorative and walking-friendly flooring systems with premium impression and low maintenance costs.



Parking decks

Coating systems with proof of trafficability for the special requirements of parking decks: Mechanically loadable, resistant against petrol and thawing agents, and in addition tested for wear-resistance.



Specialist Systems – Surface Protection M.V. O’Halloran Ltd.


  • Abrasion Resistant Structured Finishes
  • Crack Injection
  • Anti – Bacterial Coatings
  • Decorative / Commercial Finishes
  • Asbestos Encapsulation
  • High Chemical Resistant Systems
  • Roof Membrane Systems
  • Impact Resistant Flooring
  • Bund Lining Systems
  • Intumescent Paint Systems
  • Industrial Flooring
  • Joint Sealants
  • Anti Fatigue Surfaces
  • Hygienic Finishes
  • Logo & Safety Markings
  • Concrete Repair
  • Sound Absorption Resins
  • Conservation and Restoration
  • Multi Elastic Sports Flooring
  • Corrosion Control
  • Wet Pour Play Surfaces


Listed above are the full range of our specialist systems, if you would like any details on any of our specialist areas please  Contact us

Web Design & IT Support Dublin